Show simple item record

dc.contributor.authorHolt, Brendanen_US
dc.date.accessioned2009-08-19T16:36:49Z
dc.date.available2014-08-19T06:20:31Z
dc.date.issued2009-08-19T16:36:49Z
dc.identifier.otherbibid: 6681364
dc.identifier.urihttps://hdl.handle.net/1813/13509
dc.description.abstractWe developed a motion capture system for the purpose of reconstructing the deforming wing surfaces of a bird performing sustained ?apping ?ight. Our facility consisted of a 13-m long free ?ight tunnel which hosted two calibrated 500-fps digital cameras and multiple high powered lamps. The experimental setup was tested with several species. The best results were obtained with a wild, immature red-winged blackbird (Agelaius phoeniceus) whose wing joints and remiges were labeled with 3-mm retrore?ective markers. For each camera?s recording of the ?ight we digitized the 2D marker paths and from them reconstructed the 3D trajectories using the direct linear transformation method. We ?t a virtual wing model consisting of bones and feathers to the marker trajectories and extracted approximate joint kinematics from the shoulder, elbow, and wrist. These time-dependent angle data of the joints compared favorably with those of the European starling (Sturnus vulgaris) obtained in wind tunnel experiments [DJJ91]. The wing model also matched the silhouettes of the red-winged blackbird when superimposed over the original footage. Although more experiments are needed to verify the accuracy of our method, future results would ?nd diverse application in simulating the complex aerodynamics of bird ?ight, quantitatively comparing ?ight behaviors among di?erent species for the bene?t of ornithology, and animating virtual birds with heightened realism in the visual e?ects industry.en_US
dc.language.isoen_USen_US
dc.titleMotion Capture Of A Red-Winged Blackbird In Free Flighten_US
dc.typedissertation or thesisen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Statistics