Cornell University
Library
Cornell UniversityLibrary

eCommons

Help
Log In(current)
  1. Home
  2. Cornell University Graduate School
  3. Cornell Theses and Dissertations
  4. VALORIZATION OF RESIDUES FROM AGRICULTURAL AND FOOD INDUSTRIES TOWARDS BIOFUELS AND BIOPRODUCTS USING BIOCHEMICAL AND THERMOCHEMICAL TECHNOLOGIES

VALORIZATION OF RESIDUES FROM AGRICULTURAL AND FOOD INDUSTRIES TOWARDS BIOFUELS AND BIOPRODUCTS USING BIOCHEMICAL AND THERMOCHEMICAL TECHNOLOGIES

File(s)
CanteroTubilla_cornellgrad_0058F_10486.pdf (14.65 MB)
Permanent Link(s)
https://doi.org/10.7298/X4TB152H
https://hdl.handle.net/1813/56990
Collections
Cornell Theses and Dissertations
Author
Cantero-Tubilla, Borja
Abstract

The large volumes of organic waste streams produced daily as a part of our food and water supply systems create a global management challenge. Traditionally, these wastes are landfilled, composted, or used for the production of animal feed and fertilizers. However, the majority of this waste has a high potential for recovery of valuable bio-based products. Hydrothermal processes are well suited for the valorization of wet organic waste. Hydrothermal liquefaction (HTL) is performed at temperatures ranging 250-350˚C and high pressures to exploit the special properties of hot liquid water. HTL yields a bio-crude oil, hydro-char, water-soluble compounds, and gas. These phases have the potential to be used as “building blocks” for the production of fuels and bio-products. In this project, valorization of representative wastes: from food production (wine, apple cider, beer, and olive oil production), dairy industry (manure and whey), and wastewater treatment plant were screened at different temperatures, reaction times, and pH conditions. Carbon balances gave information about the influence of the raw material and reaction conditions in directing carbon to any of the four HTL products (i.e., char, oil, water and gas). In the HTL of cow manure, higher temperatures and longer residence times favored the concentration of carbon from raw material into the oil phase (15%wt C at 250˚C and 5 min to 40%wt C at 300˚C and 60 min) at the expense of the char fraction. The energy quality of the bio-crude recovered resembled the bio-ethanol fuel, and it is far lower than the energy density found in commercial gasoline. This has to do with the oxygen content remaining in bio-crude oil that, lower than the feedstock, is much higher compared to commercial gasoline. Therefore, downstream upgrading processes are necessary to convert the obtained bio-crudes into drop-in fuels. Moreover, HTL products were characterized using novel FTIR techniques coupled with multivariate statistics, GCMS, and HPLC offering a deeper understanding on the mechanisms behind hydrothermal processing of waste.

Date Issued
2017-08-30
Keywords
Chemical engineering
Committee Chair
Tester, Jefferson William
Committee Member
You, Fengqi
Scott, Norman Roy
Degree Discipline
Chemical Engineering
Degree Name
Ph. D., Chemical Engineering
Degree Level
Doctor of Philosophy
Type
dissertation or thesis

Site Statistics | Help

About eCommons | Policies | Terms of use | Contact Us

copyright © 2002-2026 Cornell University Library | Privacy | Web Accessibility Assistance